WR04011
WORX Yamaha 1.8 Supercharged Engine Cooling Kit (2008+) - WR04011
This WORX Yamaha 1.8 engine cooling kit is built for Yamaha 1.8 supercharged models and helps address heat buildup during sustained high RPM use. It is a practical cooling upgrade for stock and mild setups, and it becomes especially important on skis with a re-programmed ECU and a higher RPM limit. Does not fit naturally aspirated 1.8 models (FX HO, VXR, VXS, GP1800R HO).
This kit improves cooling flow on Yamaha 1.8 supercharged platforms that see harder use than casual riding. When engine speed stays up for longer periods, extra cooling capacity helps reduce engine stress and support more stable operating conditions. WORX positions this kit for stock and mild applications such as a filter and reflash, and it is a must for skis running a re-programmed ECU with a higher RPM limit.
Installation is not a simple bolt-on with no hull work. The install requires drilling a 16 mm hole in the hull for the thru-hull fitting. You will also fit the cooling plate to the pump and replace the OEM anode on the engine block with the WORX cooling block. No tune is required for this kit.
WORX offers this Yamaha 1.8 cooling system in four versions. WR04011 fits 2008-2013 models and includes fittings, 1/2 in hose, and clamps. WR04011-2 is the same 2008-2013 package but adds a strainer. WR04018 covers 2014-2019 applications. WR04019 covers 2020 and newer applications. Only WR04011-2 includes a strainer.
Does not fit naturally aspirated 1.8 models (FX HO, VXR, VXS, GP1800R HO).
Yamaha
Not sure about your ski? Use the fitment finder on this page or call/text 786-465-5150.
| Part # | WR04011-2 |
| Brand | Worx Racing |
| Fitment | Yamaha. Full model and year list under Compatible Models above. |
| Fitment exclusions | Does not fit naturally aspirated 1.8 models (FX HO, VXR, VXS, GP1800R HO) |
| What's included | Fittings, 1/2 in hose, clamps, and strainer |
| Install notes | Drill a 16 mm hole in the hull for the thru-hull fitting, fit the cooling plate to the pump, and replace the OEM anode on the engine block with the WORX cooling block |
Will this fit my ski?
Check Compatible Models above or use the fitment finder on this page. Not sure? Call or text 786-465-5150 before ordering.
Do I need a tune?
No. A tune is not required for this cooling kit.
Does this version include a strainer?
Yes. WR04011-2 is the 2008-2013 with strainer version. Only WR04011-2 includes a strainer.
Does installation require drilling?
Yes. Installation requires drilling a 16 mm hole in the hull for the thru-hull fitting, along with fitting the cooling plate to the pump and replacing the OEM anode with the WORX cooling block.
Why Buy From Cabrera MotorSports?
We race what we sell. We race and wrench on these platforms ourselves, so your fitment and setup questions get answered by a racer, not a call center.